Self-priming Magnetic Centrifugal Pump

Self-priming magnetic centrifugal pump can easily handle sulfuric acid, hydrochloric acid, nitric acid, chromic acid, hydrofluoric acid and other acid and alkali liquids.

Product Description

Self-priming magnetic centrifugal pump

· Innovative idle-resistant design makes the pump run for a long time, greatly improving the durability of the product.

· Self-priming design The design of one-gas-liquid separation ensures a high self-priming speed.

· Unique axial-free seal design eliminates temperature rise, deformation and drainage during long-term operation.
· Strong corrosion resistance, material GFAPP, PVDF strong acid, strong alkali resistance.
· Applicable temperature: below 80℃.

 

 

 

Feature:

1. Excellent acid and alkali resistance: according to acidic and alkaline of medium to choose FRPP or PVDF material
2. Magnetic synchronous drive, no contact and friction, low power dissipation, high efficiency, with vibration damping effect.
3. Sealless & no leakage
4. Easy installation: standard inner body, delicate structure
5. High durability: heat dissipation structure inside
6. Wide-used: M series (0.5kw-5kw) model, for the various industrial processes, such as PCB processes, chemical industry, filter cycle, etching, electroplating, surface treatment sewage treatment, excellent performance and durability

 

1. Different chemical solutions mixed together will cause reaction and even heat to damage the pump. Don’t pump different chemical solutions with the same pump.

2. Chemicals may cause serious injury. Keep away from dangerous area.

3. Before operating, please check the discharge and suction line and valvesrst. Make sure valves are all in correct position, then start. During operation, check discharge usually.

4. Incorrect operation, for example, valves closed, incompatible material and dry running may cause dangerous. Especially dry running, it will cause heat as well as vapor, even some chemical decomposes hydrogen and explode.

5. Start the pump and check the discharge from the outlet. If it is too low, unplug the pump immediately, and check the pipeline if there is any block..

6. The pump can be equipped with explosive-proof and pressure-proof motor.

 

 

Magnetic drive circulation pump is a full-sealeed pump, for motor connecting shaft and impeller

are separately equipped with magnetic materials, they attract each other and coupled. It’s

unnecessary to fit with traditional shaft seal. The rotation of motor drives impeller to rotate through the attraction between driving magnet and driven magnet. Our magnetic drive circulation pump is generally designed for no shaft seal, completely avoids defects of pollution after corrosion caused by liquid leakage,which exists in traditional mechanical shaftscal pump. It is the optimum liquid transport pump on the industrial equipments.

Inquiry